Aluminum Door Replacement Project Checklist

A replacement project starts with an existing opening, but it should not begin with a guess about the new door. For a contractor, distributor or property team, the most useful enquiry records the current condition, intended use and physical constraints that the next configuration needs to accommodate. That gives the review a practical basis before anyone assumes a size, system, performance level or installation method.

This guide supports early planning. It does not provide safety instructions, code advice, standard dimensions, performance claims or a replacement timetable for a particular AUTINBERG product.

Document the existing opening and surrounding conditions

Identify the location, project item code and intended use of the opening. Record whether the supplied dimensions relate to the structural opening, finished opening, old frame, clear passage or another reference. Photographs can help show wall finishes, floor levels, adjacent joinery and access constraints, but they should be tied to a drawing or measurement record where possible.

If the existing door has a particular operation issue, describe the observed condition rather than diagnosing a cause from a photograph. A replacement review may need to consider the opening, wall condition, intended movement and surrounding finishes together.

Define how the replacement should operate

For a hinged layout, record the viewing side, hinge side, swing direction and required clearance. For a sliding layout, show the panel travel, fixed panels if any, wall or head condition and the space beside the opening. Note nearby furniture, services, switches and finish transitions that could affect the planned configuration.

AUTINBERG's MX04, MX09 and MX25 are catalogue references for interior-door appearances. MX28 is a glass sliding-door reference listing Jazz Black and White Acid Frosted. These entries do not confirm that a specific model is a suitable replacement for an existing opening, nor do they establish dimensions, glass build-up, hardware limits or outdoor suitability.

Separate appearance wishes from configuration questions

List the visible direction the project wants to keep or change: panel appearance, frame appearance, glass treatment or handle direction. For example, MX04 shows Brazilian Walnut on panel and frame; MX09 shows an Off-white panel with New Porcelain Black frame; MX25 shows French Rosewood with New Porcelain Black. Treat these as catalogue appearance references, not as proof of material construction or a guaranteed replacement match.

Ask separately for the selected configuration's scope and documentation. A complete discussion may need to identify the proposed panel or leaf, frame, glass, hardware, tracks, guides, locks, handles, seals and accessories, depending on the door and the project.

Plan access and release information

Replacement work often has access and sequencing constraints. Note when the opening can be reviewed, what surrounding work must be coordinated, and which project contact controls the current information. Do not promise a project date until the selected configuration, order scope and necessary approvals have been reviewed.

Before release, keep the final item code, drawing revision, visible finish reference and supplied scope together. These references will also help the receiving and installation teams distinguish the replacement from the old door or from similar-looking items elsewhere on site.

FAQ

What should I include in a replacement door enquiry?

Include the opening or drawing reference, dimension type, intended operation, quantity, destination, visible finish direction, current site constraints and any requirement that needs project-specific confirmation.

Can an existing door photo determine the replacement model?

No. A photo may help explain the opening or visible intent, but it does not confirm a new door's configuration, dimensions, scope or suitability.

Should I use an interior catalogue reference for an exterior replacement?

Not without confirmation. The reviewed catalogue reference must be assessed against the actual exposure, opening, glass and project requirements before it is treated as suitable.

Conclusion

A planned replacement starts with the real opening rather than a generic door image. Record the opening conditions, operation, access and visible direction; then request a configuration review that makes the proposed scope clear. This gives the project a safer path from an existing condition to a controlled order reference.

Planning an aluminum door replacement? Explore entry doors, interior room doors and glass sliding doors, then share the opening information through the enquiry form or the website WhatsApp link.